Ethernet
Unmanaged Ethernet Switches
Managed Ethernet Switches
Power Over Ethernet (PoE) Switches
- Layer 2 and Layer 3 Industrial power over
Ethernet (POE) & POE++
- Switches, Injectors and Splitters
- Transmits power and data over Ethernet networks
- Recovery time < 30ms over 250 units of
connection
- MSTP (RSTP, STP compatible) for Ethernet
redundancy
- P.S.E fully compliant with IEEE 802.3at
standard, provides up to 30W per port
- Supports Max PoE output up-to 720 Watts
- Web-based, Telnet, Console (CLI) and Windows
utility (Open-Vision) configuration
- Dual Redundant Power Inputs available
- Managed, Unmanaged, SM, MM FO, Giga Ports
available
- Din-Rail, Wall, Rack Mounting available
- Available in 2 to 28 ports
Industrial Solution
Power Sub Station (IEC – 61850)
Industrial Solution
Oil & Gas (C1D2 / ATEX)
Wireless
Bypass Switch
- High Speed Air Connectivity: WLAN interface
support up to 300Mbps link speed
- Support 10/100/1000Base-T(X) port and 2 SIM card
slot
- Support dual 4G/3.5G/3G dial up backup and load
balance
- EN50155-compliant available
- Serial communication via RS232/RS422/RS485
interface
- Provide HNAT enhance LAN to WAN routing
performance
- Highly Security Capability:
WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2 PSK
(TKIP,AES) / 802.1X Authentication supported.
- Secured Management by HTTPs
- Integrated firewall
- Support STP (802.1D) for wireless redundancy
- Various kind of WAN Connection Type supported :
Dynamic/ Static IP, PPPoE, Modem/Dial Up
- Support VPN for secured network connection (Open
VPN , PPTP VPN, IPSEC VPN)
- Support NAT Setting (Virtual Server, Port
Trigger, DMZ, UPnP)
- Modbus Protocol conversion between ModbusTCP and
Modbus RTU
- Event warning by Syslog, Email, SNMPTrap, Relay
output
- 1KV isolation for PoE P.D. port
- Rigid IP-30/IP67 housing design
- DIN-Rail and Wall-mount enabled
DC Coil, 1C/O with option of fuse & LED
- Fast traceability of signal status through Channel-wise LED indications.
- Plug In Type Relays.
- Interchangeable Looping at Input side using jumpers.
- Reduces Installation & commissioning time.
- Compact in design.
- Universal Rail mounting.
- Relay: 24VDC Coil, 1 Changeover
- Relay Socket: 1 Changeover PCB solderable type
- Terminals: Screw type suitable for 2.5Sq.mm conductor
- PCB: Glass Epoxy double side PTH with Lacquer Coating
DC Coil, 2C/O with option of fuse & LED
- Fast traceability of signal status through Channel-wise LED indications.
- Plug In Type Relays.
- Interchangeable Looping at Input side using jumpers.
- Reduces Installation & commissioning time.
- Compact in design.
- Universal Rail mounting.
- Component Specification
- Relay: 24VDC Coil, 2 Changeover
- Relay Socket: 2 Changeover, PCB solderable type
- Terminals: Screw type suitable for 2.5Sq.mm conductor
- PCB: Glass Epoxy double side PTH with Lacquer Coating
DC Coil, 4C/O with pot free contacts
- Fast traceability of signal status through Channel-wise LED indications.
- Plug In Type Relays.
- Reduces Installation & commissioning time.
- Compact in design.
- Universal Rail mounting.
- Relay: 24VDC Coil, 4 Changeover
- Relay Socket: 4 Changeover PCB solderable type
- Terminals: Screw type suitable for 2.5Sq.mm conductor
- PCB: Glass Epoxy double side PTH with Lacquer Coating
AC Coil, 1C/O with option of fuse & LED
- Fast traceability of signal status through Channel-wise LED indications.
- Plug In Type Relays.
- Reduces Installation & commissioning time.
- Compact in design.
- Universal Rail mounting.
- Relay : 230VAC Coil, 1Changeover
- Relay Socket: 1 Changeover PCB solderable type
- Terminals: Screw type suitable for 2.5Sq.mm conductor
- PCB: Glass Epoxy double side PTH with Lacquer Coating
AC Coil, 2C/O with option of fuse & LED
- Fast traceability of signal status through Channel-wise LED indications.
- Plug In Type Relays.
- Reduces Installation & commissioning time.
- Compact in design.
- Universal Rail mounting.
- Relay: 230VAC Coil, 2 Changeover
- Relay Socket: 2 Changeover, PCB solderable type
- Terminals: Screw type suitable for 2.5Sq.mm conductor
- PCB: Glass Epoxy double side PTH with Lacquer Coating
AC Coil, 4C/O with pot free contacts
- Fast traceability of signal status through Channel-wise LED indications.
- Plug In Type Relays.
- Reduces Installation & commissioning time.
- Compact in design.
- Universal Rail mounting.
- Relay: 24VDC Coil, 4 Changeover
- Relay Socket: 4 Changeover, PCB solderable type
- Terminals: Screw type suitable for 2.5Sq.mm conductor
- PCB: Glass Epoxy double side PTH with Lacquer Coating
Slim Relay Module 1C/O Pot free
- Fast traceability of signal status through Channel-wise LED indications.
- Plug In Type Relays.
- Interchangeable Looping at Input side using jumpers.
- Reduces Installation & commissioning time.
- Compact in design.
- Universal Rail mounting.
- Relay: 24VDC Coil, 1 Changeover
- Relay Socket: 1 Changeover PCB solderable type
- Terminals: Screw type suitable for 2.5Sq.mm conductor
- PCB: Glass Epoxy double side PTH with Lacquer Coating
Slim Relay Module 1C/O Wetted Contact
- Fast traceability of signal status through Channel-wise LED indications.
- Plug In Type Relays.
- Interchangeable Looping at Input side using jumpers.
- Reduces Installation & commissioning time.
- Compact in design.
- Universal Rail mounting.
- Relay: 24VDC Coil, 1 Changeover
- Relay Socket: 1 Changeover PCB solderable type
- Terminals: Screw type suitable for 2.5Sq.mm conductor
- PCB: Glass Epoxy double side PTH with Lacquer
Slim Relay Module 1C/O Pot-free/Wetted Selectable
- Fast traceability of signal status through Channel-wise LED indications.
- Plug In Type Relays.
- Interchangeable Looping at Input side using jumpers.
- Reduces Installation & commissioning time.
- Compact in design.
- Universal Rail mounting.
- Relay: 24VDC Coil, 1 Changeover
- Relay Socket: 1 Changeover PCB solderable type
- Terminals: Screw type suitable for 2.5Sq.mm conductor
- PCB: Glass Epoxy double side PTH with Lacquer Coating
Solid State Relay Module for DC Output
- Fast traceability of signal status through Channel-wise LED indications.
- Plug In Type Relays.
- Interchangeable Looping at Input side using jumpers.
- Reduces Installation & commissioning time.
- Compact in design.
- Universal Rail mounting.
- SSR: Input - 24VDC, Output - DC Load.
- SSR: Input - 24VDC, Output - DC Load.
- Terminals: Screw type suitable for 2.5Sq.mm conductor
- PCB: Glass Epoxy double side PTH with Lacquer Coating
Solid State Relay Module for AC Output
- Fast traceability of signal status through Channel-wise LED indications.
- Plug In Type Relays.
- Interchangeable Looping at Input side using jumpers.
- Reduces Installation & commissioning time.
- Compact in design.
- Universal Rail mounting.
- SSR: Input - 24VDC, Output - AC Load.
- SSR Socket: Available on request.
- Terminals: Screw type suitable for 2.5Sq.mm conductor
- PCB: Glass Epoxy double side PTH with Lacquer Coating
